One place for hosting & domains

      How to Choose a Data Center


      Updated by Linode Written by Linode

      Deploying your Linode to a geographically advantageous data center can make a big difference in connection speeds to your server. Ideally, your site or application should be served from multiple points around the world, with requests sent to the appropriate region based on client geolocation. On a smaller scale, deploying a Linode in the data center nearest to you will make it easier to work with than one in a different region or continent.

      There are many things can affect network congestion, connection speeds, and throughput, so you should never interpret one reading as the sole data point. Always perform tests in multiples of three or five for an average, and on both weekend and weekdays for the most accurate information.

      This page is a quick guide for choosing and speed testing a data center (DC). Start by creating a Linode in the data center in or near your region, or several Linodes in multiple regions if you’re close to more than one DC. From there, use Linode’s Facilities Speedtest page for test domains to ping and files to download.

      Network Latency

      The Linux ping tool sends IPv4 ICMP echo requests to a specified IP address or hostname. Pinging a server is often used to check whether the server is up and/or responding to ICMP. Because ping commands also return the time it takes a request’s packet to reach the server, ping is commonly used to measure network latency.

      Ping a data center to test your connection’s latency to that DC:

      ping -c 5 speedtest.dallas.linode.com
      

      Use ping6 for IPv6:

      ping6 -c 5 speedtest.dallas.linode.com
      

      Note

      Many internet connections still don’t support IPv6 so don’t be alarmed if ping6 commands don’t work to your Linode from your local machine. They will, work from your Linode to other IPv6-capable network connections (ex. between two Linodes in different data centers).

      Download Speed

      Download speed will be limited most heavily first by your internet service plan speed, and second from local congestion between you and your internet service provider. For example, if your plan is capped at 60 Mbps, you won’t be able to download much faster than that from any server on the internet. There are multiple terminologies to discuss download speeds with so here are a few pointers to avoid confusion:

      • Residential internet connection packages are sold in speeds of megabits per second (abbreviated as Mbps, Mb/s, or Mbit/s).

      • One megabit per second (1 Mbps or 1 Mb/s) is 0.125 megabytes per second (0.125 MB/s). Desktop applications (ex: web browsers, FTP managers, Torrent clients) often display download speeds in MB/s.

      • Mebibytes per second is also sometimes used (MiB/s). One Mbps is also equal to 0.1192 MiB/s.

      To test the download speed from your data center of choice, use the cURL or wget to download the bin file from a data center of your choice. You can find the URLs on our Facilities Speedtest page.

      For example:

      curl -O http://speedtest.dallas.linode.com/100MB-dallas.bin
      wget http://speedtest.dallas.linode.com/100MB-dallas.bin
      

      Below you can see that each time cURL is run, a different average download speed is reported and each takes a slightly different amount of time to complete. This is to be expected, and you should analyze multiple data sets to get a real feel for how fast a certain DC will behave for you.

      root@debian:~# curl -O http://speedtest.dallas.linode.com/100MB-dallas.bin
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      100  100M  100  100M    0     0  11.4M      0  0:00:08  0:00:08 --:--:-- 12.0M
      
      root@debian:~# curl -O http://speedtest.dallas.linode.com/100MB-dallas.bin
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      100  100M  100  100M    0     0  10.8M      0  0:00:09  0:00:09 --:--:--  9.9M
      
      root@debian:~# curl -O http://speedtest.dallas.linode.com/100MB-dallas.bin
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      100  100M  100  100M    0     0  9189k      0  0:00:11  0:00:11 --:--:-- 10.0M
      

      Find answers, ask questions, and help others.

      This guide is published under a CC BY-ND 4.0 license.



      Source link


      Leave a Comment