One place for hosting & domains

      How To Install Node.js on Debian 9


      Introduction

      Node.js is a JavaScript platform for general-purpose programming that allows users to build network applications quickly. By leveraging JavaScript on both the front and backend, Node.js makes development more consistent and integrated.

      In this guide, we’ll show you how to get started with Node.js on a Debian 9 server.

      Prerequisites

      This guide assumes that you are using Debian 9. Before you begin, you should have a non-root user account with sudo privileges set up on your system. You can learn how to set this up by following the initial server setup for Debian 9.

      Installing the Distro-Stable Version for Debian

      Debian contains a version of Node.js in its default repositories. At the time of writing, this version is 4.8.2, which will reach end-of-life at the end of April 2018. If you would like to experiment with the language using a stable and sufficient option, then installing from the repositories may make sense. It is recommended, however, that for development and production use cases you install a more recent version with a PPA. We will discuss how to install from a PPA in the next step.

      To get the distro-stable version of Node.js, you can use the apt package manager. First, refresh your local package index:

      Then install the Node.js package from the repositories:

      If the package in the repositories suits your needs, then this is all you need to do to get set up with Node.js.

      To check which version of Node.js you have installed after these initial steps, type:

      Because of a conflict with another package, the executable from the Debian repositories is called nodejs instead of node. Keep this in mind as you are running software.

      Once you have established which version of Node.js you have installed from the Debian repositories, you can decide whether or not you would like to work with different versions, package archives, or version managers. Next, we'll discuss these elements, along with more flexible and robust methods of installation.

      Installing Using a PPA

      To work with a more recent version of Node.js, you can add the PPA (personal package archive) maintained by NodeSource. This will have more up-to-date versions of Node.js than the official Debian repositories, and will allow you to choose between Node.js v4.x (the older long-term support version, which will be supported until the end of April 2018), Node.js v6.x (supported until April of 2019), Node.js v8.x (the current LTS version, supported until December of 2019), and Node.js v10.x (the latest version, supported until April of 2021).

      Let's first update the local package index and install curl, which you will use to access the PPA:

      • sudo apt update
      • sudo apt install curl

      Next, let's install the PPA in order to get access to its contents. From your home directory, use curl to retrieve the installation script for your preferred version, making sure to replace 10.x with your preferred version string (if different):

      • cd ~
      • curl -sL https://deb.nodesource.com/setup_10.x -o nodesource_setup.sh

      You can inspect the contents of this script with nano or your preferred text editor:

      Run the script under sudo:

      • sudo bash nodesource_setup.sh

      The PPA will be added to your configuration and your local package cache will be updated automatically. After running the setup script, you can install the Node.js package in the same way you did above:

      To check which version of Node.js you have installed after these initial steps, type:

      Output

      v10.9.0

      The nodejs package contains the nodejs binary as well as npm, so you don't need to install npm separately.

      npm uses a configuration file in your home directory to keep track of updates. It will be created the first time you run npm. Execute this command to verify that npm is installed and to create the configuration file:

      Output

      6.2.0

      In order for some npm packages to work (those that require compiling code from source, for example), you will need to install the build-essential package:

      • sudo apt install build-essential

      You now have the necessary tools to work with npm packages that require compiling code from source.

      Installing Using NVM

      An alternative to installing Node.js through apt is to use a tool called nvm, which stands for "Node.js Version Manager". Rather than working at the operating system level, nvm works at the level of an independent directory within your home directory. This means that you can install multiple self-contained versions of Node.js without affecting the entire system.

      Controlling your environment with nvm allows you to access the newest versions of Node.js and retain and manage previous releases. It is a different utility from apt, however, and the versions of Node.js that you manage with it are distinct from those you manage with apt.

      To download the nvm installation script from the project's GitHub page, you can use curl. Note that the version number may differ from what is highlighted here:

      • curl -sL https://raw.githubusercontent.com/creationix/nvm/v0.33.11/install.sh -o install_nvm.sh

      Inspect the installation script with nano:

      Run the script with bash:

      It will install the software into a subdirectory of your home directory at ~/.nvm. It will also add the necessary lines to your ~/.profile file to use the file.

      To gain access to the nvm functionality, you'll need to either log out and log back in again or source the ~/.profile file so that your current session knows about the changes:

      With nvm installed, you can install isolated Node.js versions. For information about the versions of Node.js that are available, type:

      Output

      ... v8.11.1 (Latest LTS: Carbon) v9.0.0 v9.1.0 v9.2.0 v9.2.1 v9.3.0 v9.4.0 v9.5.0 v9.6.0 v9.6.1 v9.7.0 v9.7.1 v9.8.0 v9.9.0 v9.10.0 v9.10.1 v9.11.0 v9.11.1 v10.0.0 v10.1.0 v10.2.0 v10.2.1 v10.3.0 v10.4.0 v10.4.1 v10.5.0 v10.6.0 v10.7.0 v10.8.0 v10.9.0

      As you can see, the current LTS version at the time of this writing is v8.11.1. You can install that by typing:

      Usually, nvm will switch to use the most recently installed version. You can tell nvm to use the version you just downloaded by typing:

      When you install Node.js using nvm, the executable is called node. You can see the version currently being used by the shell by typing:

      Output

      v8.11.1

      If you have multiple Node.js versions, you can see what is installed by typing:

      If you wish to default one of the versions, type:

      This version will be automatically selected when a new session spawns. You can also reference it by the alias like this:

      Each version of Node.js will keep track of its own packages and has npm available to manage these.

      You can also have npm install packages to the Node.js project's ./node_modules directory. Use the following syntax to install the express module:

      If you'd like to install the module globally, making it available to other projects using the same version of Node.js, you can add the -g flag:

      This will install the package in:

      ~/.nvm/versions/node/node_version/lib/node_modules/express
      

      Installing the module globally will let you run commands from the command line, but you'll have to link the package into your local sphere to require it from within a program:

      You can learn more about the options available to you with nvm by typing:

      Removing Node.js

      You can uninstall Node.js using apt or nvm, depending on the version you want to target. To remove versions installed from the repositories or from the PPA, you will need to work with the apt utility at the system level.

      To remove either of these versions, type the following:

      This command will remove the package and the configuration files.

      To uninstall a version of Node.js that you have enabled using nvm, first determine whether or not the version you would like to remove is the current active version:

      If the version you are targeting is not the current active version, you can run:

      • nvm uninstall node_version

      This command will uninstall the selected version of Node.js.

      If the version you would like to remove is the current active version, you must first deactivate nvm to enable your changes:

      You can now uninstall the current version using the uninstall command above, which will remove all files associated with the targeted version of Node.js except the cached files that can be used for reinstallation.

      Conclusion

      There are a quite a few ways to get up and running with Node.js on your Debian 9 server. Your circumstances will dictate which of the above methods is best for your needs. While using the packaged version in the Debian repository is an option for experimentation, installing from a PPA and working with npm or nvm offers additional flexibility.



      Source link